MIK-1158-J Ultrasonic Water flow meter

Short Description:

An ultrasonic water flow meter is a type of flow meter that measures the velocity of a liquid by using ultrasonic waves. The meter has two transducers that are placed at an angle across the flow path of the liquid. The transducers send and receive ultrasonic pulses, and the time difference between the pulses is used to calculate the velocity of the liquid. The velocity is then multiplied by the cross-sectional area of the pipe to determine the flow rate of the liquid.


Product Detail

Product Tags

Introduction

The MIK-1158-J ultrasonic flow meter uses advanced circuit design, coupled with excellent hardware designed in English and can be switched surfaces. It is easy to operate and with stable performance. This wall-mounted ultrasonic flow meter with a clamp-on sensor is used in testing equipment filter elements for water purifiers. It could be also installed in some residential areas and commonly used for testing water supply and monitoring. With functions like ARM, FPGA chip, low voltage, and wide pulse transmission technology design can this ultrasonic flow meter reach high precision and produce reliable performance.

Ultrasonic water flow meters are non-intrusive, which means that they do not require any part of the meter to come into contact with the liquid. This makes them ideal for use in applications where the liquid being measured may be corrosive or dangerous. They are commonly used in industries such as water treatment, chemical processing, and oil and gas production, as well as in municipal water supply systems.

Product Highlights

  • Without cutting pipes.
  • Real-time measurement.
  • Easy operation.
  • Various piping material available: Carbon steel pipe, stainless steel pipe, PVC pipe.
  • Wide measuring range: DN25~DN1200.
  • ARM,FPGA chip and wide pulse transmission technology design.
  • Wide voltage power supply: 10-36V.
  • RS485 Communication intelligent remote.
  • Ingress protection: IP68.
  • Standard 9m anti-interference shielding line and fully closed design.
  • Piping material: limited to external clamps,single material;No: lining,PMMA, cement pipe, water scale.
  • Medium temperature: 0~80℃.

Specification

 Product Name  Ultrasonic Water flow meter
 Flow range  0.03 ~ 16 ft/s (0.01 ~ 5.0 m/s)
 Accuracy  ± 1.0 %
 Pipe size  Clamp-on: 1”-48” (25mm ~ 1200mm)
 Fluid  Water
 Outputs  OCT Pulse output: 0-5000Hz
 Analog output  4-20mA, max load 750Ω
 Communication interface  RS485 MODBUS
 Power supply  10-36VDC/1A
 Keypad  16 (4×4) key with tactile action
 Display  20×2 lattice alphanumeric, back lit LCD
 Temperature  Transmitter: 14 °F to 122 °F (–10℃ ~ 50℃)
 Transducer  32 °F to 176 °F (0℃ ~ 80℃)
 Temperature  Common 0~80℃(80~150℃ high temperature optional)
 Humidity  Up to 99% RH, non-condensing
 Transmitter  PC/ABS, IP65
 Transducer  Encapsulated design, IP68
 Transducer cable  Standard cable length: 30 ft (9m)
 Weight  Transmitter: approximately 0.7kg
 Transducer  approximately 0.4kg

  • Previous:
  • Next:

  • Write your message here and send it to us